Open Loop Vector Control Inverter VFD 220V-380V Power Range 599Hz Maximum Frequency

Lugar de origen:Porcelana
Nombre de la marca:Bebaios
Certificación:CE\NA
Número de modelo:SP600T-3R7KY-2/SP600T-5R5KY-4/SP600T-7R5KY-4
Cantidad mínima de pedido:1
Precio:N\A
Condiciones de pago:T/T, Unión Occidental
Capacidad de suministro:6000 unidades por mes
Detalles del producto
Resaltar:

Open Loop Vector Control Inverter

,

220V-380V Power Range VFD

,

599Hz Maximum Frequency Inverter
Power Range: 220 V: 3,7-75 kW, 380 V: 5,5-132 kW
Control Mode: Control vectorial de bucle abierto, control V/F, soporte PM
Maximum Frequency: 0~599 Hz
Carrier Frequency: 0,5 kHz ~ 8 kHz
Speed Stability Accuracy: ± 0.2%
Overload Capacity: 60 s para el 150 % de la corriente nominal, 3 s para el 180 % de la corriente nominal
Descripción de producto
Air Compressor Integrator Inverter
Product Overview

The SP600 series is a dedicated integrated inverter designed for air compressors, supporting both wall mounting and floor standing installation. It adopts error‑proof pluggable terminals for fast and reliable wiring. Built‑in detection and protection circuits integrate PT100, PTC, pressure sensors, solenoid valves, and fans, enabling comprehensive monitoring and safe operation. Equipped with dual‑channel RS485 (Modbus RTU) as standard, it supports HMI and IoT expansion for easy one‑click startup.

Power range:

220V: 3.7–75kW (special order)

380V: 5.5–132kW

Control modes include open‑loop vector control, V/F control, and PM motor support, with a wide frequency range up to 599Hz, delivering stable performance and high efficiency for industrial air compressors.

Product Advantages
  • Flexible Installation Options: Supports both wall-mounted and floor-standing configurations to adapt to diverse on-site layouts.
  • Error-Proof Wiring: Features pluggable terminals with anti-misconnection design for fast, secure, and mistake-free installation.
  • Comprehensive Integrated Protection: Built-in detection and protection circuits for PT100, PTC, pressure sensors, solenoid valves, and cooling fans, ensuring full monitoring of key system parameters.
  • Smart Communication & Control: Equipped with dual-channel RS485 (Modbus RTU) as standard, supporting seamless HMI and IoT expansion, enabling one-click startup and intelligent operation.
Technical Specifications
Open Loop Vector Control Inverter VFD 220V-380V Power Range 599Hz Maximum Frequency 0

Dimension

SP600T-3R7KY-2  /  SP600T-5R5KY-4  /  SP600T-7R5KY-4

W (mm)

118

H (mm)

238

H1 (mm)

274

D (mm)

154

A (mm)

80

B (mm)

260

Φd (mm)

5.5

Category

Item

SP600 Specification

Basic control functions

Control mode

Open loop vector control, V/F control, Support PM


Maximum frequency

0~599Hz


Carrier frequency

0.5kHz~8kHz, carrier frequency is automatically adjusted based on the load features.


Input frequency resolution

Digital setting: 0.01HzAnalog setting: maximum frequency × 0.025%


Startup torque

0.5 Hz/150%


Speed range

1:100


Speed stability accuracy

± 0.2%


Torque control accuracy

±10%


Overload capacity

60s for 150% of the rated current, 3s for 180% of the rated current.


Communication methods

RS485

Input and output interfaces

Analog Input

1 pressure sensor: 4 ~ 20mA input2 temperature sensor: PT100


Digital input

2 digital input1 PTC circuit protection (compatible with normal digital inputs)


Digital Output

1 normally open relay output (built in 220VAC voltage)


LED diode display

Standard 3 LED display

Protection

Protection functions

Motor overheating protection (PTC), power-to-ground short-circuit protection, inverter over-current, overload, over voltage, under voltage, over temperature, output phase, communication fault, fault current detection, EEPROM write failure and so on.

Environment

Installation location

Indoor, free from direct sunlight, dust, corrosive gas, combustible gas, oil smoke, vapor, drip or salt.


Altitude

Below 1000m


Ambient temperature

-10°C~40°C (de-rating if the ambient temperature is between 40°C and 50°C)


Humidity

Below 95%RH, (non-condensing)


Vibration

Below 5.9 m/s² (0.6 g)


Storage temperature

-20°C~60°C
Typical wiring diagram
Open Loop Vector Control Inverter VFD 220V-380V Power Range 599Hz Maximum Frequency 1
Company Information

Shenzhen Bebaios Machinery Co., Ltd. specializes in manufacturing industrial air compressors and pneumatic equipment. Located in Shenzhen, one of the world’s leading high-tech manufacturing hubs, we take full advantage of local industrial resources to provide reliable, energy-saving air solutions to global clients.

Quality Assurance: Stable performance and strict compliance with international quality standards.

Complete Service System: 24/7 after-sales service and a professional support team ensure fast, efficient responses to customer needs.

FQA
Q: What is the mode of transport?
A: Sea freight
Q: What payment terms do you accept?
A: Telegraphic Transfer (T/T)
Q:Is there any warranty provided for the products?
A:Yes, 180 days warranty.
Q: How long is the production cycle?
A: 3 to 5 weeks
Q:What is the production capacity of your factory?
A:Approximately 6,000 units per month.
Resumen del producto

Inversor de compresor de aire SP600 con control vectorial de bucle abierto, frecuencia máxima de 599 Hz y protección integrada. Cuenta con terminales enchufables, RS485 dual y admite montaje en pared/suelo para una instalación flexible.

Envíe una consulta
Productos relacionados
Éntrenos en contacto con
¡Puedes contactarnos en cualquier momento!